This rodent repeller comparison is for retailers deciding between SDH-041, SDH-046 and SDH-051. Short answer: stock the SDH-046 as your everyday plug-in unit for homes and small rooms, the SDH-051 as the strobe model for kitchens and garages, and the SDH-041 for customers with large open spaces such as warehouses and basements. Below are the factory specs behind that advice, plus stock, MOQ and documents.
Which rodent repeller should a retailer stock first?
If you can only list one model, start with the SDH-046 plug-in repeller with night light. It plugs straight into a wall socket, has the lowest unit price of the three, and covers the most common customer question: "I have mice or insects in a room at home." Add the other two once you know your buyers ask for bigger coverage or for a strobe.
A simple three-model shelf works like this:
- Entry / home: SDH-046, 80–120 m² open space, about one unit per 30 m² as the manual recommends.
- Mid / strobe: SDH-051 ultrasonic repeller with strobe, about 120 m², 12 LED strobe lights with infrared motion sensing.
- High power / large spaces: SDH-041 high-power dual-speaker repeller, up to about 300 m² in an open space, two ultrasonic speakers covering 360°.
SDH-041 vs SDH-046 vs SDH-051: the key specs
These figures come from our own product pages and user manuals.
Coverage
- SDH-041: up to about 300 m² in an open space.
- SDH-046: 80–120 m² open, unobstructed space.
- SDH-051: about 120 m².
Ultrasound does not pass through walls, furniture or cabinets, so one unit per room is the rule for all three. Our coverage guide explains how to calculate units per room or warehouse.
Frequency and modes
- SDH-041: four modes on a back switch — TEST (audible check), ULTRA 22–35 kHz variable, TRANS fixed 25 kHz, DUO both speakers at once. Sound pressure 100–125 dB.
- SDH-046: four modes on one button — insect 19–25 kHz, rodent 25–65 kHz, a variable cycle that adds an audible 200 Hz tone, and LED strobe mode. It restarts in Mode 1 after a power cut.
- SDH-051: four modes on a rotary switch — TEST 65 kHz, ULTRA 12–25 kHz cycle, TRANS 12–24.7 kHz sweep, DUO sweep plus strobe. Three ultrasonic speakers plus one aluminum high-frequency transducer.
Light
- SDH-041: 9 LED strobe, light sensor so it only flashes after dark, 3 flash patterns, on/off button.
- SDH-046: blue 15 lm night light, switched separately with a 3-second press, plus a strobe mode for empty rooms.
- SDH-051: 12 high-power LEDs, infrared motion-triggered at night, button on/off in any mode.
Power and installation
- SDH-041: AC 100–240 V adapter, DC 9 V to the unit, under 2.25 W. Sits on the floor with at least 1 m clear around it.
- SDH-046: direct wall plug, AC 90–240 V, 50/60 Hz, 5 W or less. Install 30–50 cm above the floor.
- SDH-051: 5 W or less, 108 × 108 × 78 mm. Place 40–80 cm above the floor, facing entry points.
Which model fits which customer?
Apartment and family homes. The SDH-046 is the easiest sell: small, plugs into any socket, silent ultrasonic modes for daytime and a night light that customers actually use. Two colorways (white and black) let you cover two listings with one model.
Kitchens, garages, attics and restaurants. The SDH-051 suits buyers who want sound and light together. The strobe only fires when the infrared sensor detects movement at night, which is a clear feature to show in a product video. Note for your listing: in TRANS and DUO modes some young people may hear a faint tone, so recommend those modes for rooms nobody sleeps in.
Warehouses, barns, basements and large garages. The SDH-041 has the largest rated coverage of the three and runs on a low-voltage adapter, so it can sit on the floor where rodents travel. Colorways are white, black and black/red. If your customer has a very large building, plan several units rather than one, placed in each separate area.
What should my product listing say?
Keep claims to what the device does: frequency range, modes, coverage in an open space, and how to place it. The SDH-051 manual says pest activity may rise in the first 1–2 weeks and usually decreases after about 3–4 weeks of continuous use. Putting that expectation in your listing reduces returns. Advise customers to seal holes and store food properly as well.
Avoid promises the device cannot guarantee. If you sell in the US, check the label and registration points in our US compliance guide with your compliance team.
Stock, MOQ and lead time for these three models
- From stock: about 3,000 units per model ready to ship in neutral packaging with an English manual. No MOQ.
- Your logo and manual: from 500 units per model.
- Custom shell color and color box: from 2,000 units per model.
- Lead time for custom orders: about 12 days after sample and artwork approval, plus shipping.
- Plugs: US, EU or UK, confirmed per order.
All three models carry CE and FCC documents and RoHS, and are made in our EPA-registered establishment, Est. No. 97987-CHN-1. For the first batch of a new repeller model we run a 24-hour aging test; repeat orders are sample-tested batch by batch. We can share the test reports for the models you choose.
How to order a sample set
The fastest way to decide is to test all three side by side. Ask for one of each model, check the modes and the light functions in your own space, and then pick one or two for your first stock order. Mixed-model orders from stock are fine because there is no MOQ.
Request a quote or read our OEM and wholesale terms.
